Cisco Linksys SGE2010P User Manual

SGE2010/SGE2010P Administration Guide 6
Placement Options
Connecting Devices to the SGE2010/SGE2010P
CAUTION: Keep enough ventilation space for the Ethernet switch so it does not exceed the
environmental restrictions mentioned in the specifications.
Rack-Mount Placement
To mount the Ethernet switch in any standard-sized, 19-inch wide, (each Ethernet switch
requires 1RU of space in the rack), follow these instructions:
1. Remove the four front screws on one side of the Ethernet switch. Retain the screws for re-
inst
allation.
2. Place one of the supplied spacers on the side of the Ethernet switch so the four holes align
to t
he screw holes.
3. Place a rack mount bracket next to the spacer and reinstall the four screws (removed in step
1).
4. Repeat steps 2 through 3 for the other side of the Ethernet switch.
5. Attach the Ethernet switch to the rack using the supplied screws.

Cisco Linksys SGE2010P Specifications

General

Brand	Cisco
Model	Linksys SGE2010P
Category	Network Router
Language	English