Cisco Linksys SGE2010P User Manual

SGE2010/SGE2010P Administration Guide 13
Using the Switch Main Menu
Using the Console
Using the Switch Main Menu
The Switch Main Menu provides access to screens that you can use to configure your system,
view or modify port and PoE settings, and view or modify system and stacking mode.
1. System Configuration (see page 13)
2. Port Status (see page 44)
3. Port Configuration (see page 46)
4. System Mode (Layer 2 / Layer 3) Selection (see page 48)
5. Help (see page 49)
0.L
ogout (see page 50)
System Configuration
The System Configuration Menu provides access to screens where you can manage system
information, view or modify management settings, set up user accounts, and manage security
settings. It also provides access to screens where you can manage VLAN IDs, IPv4 and IPv6
settings, and download upgrade files. You also will use this menu if you need to restore default
settings, reset the switch to the factory default configuration, or reboot the system.
1. System Information (see page 14)
2. Management Settings (see page 16)

Cisco Linksys SGE2010P Specifications

General

Brand	Cisco
Model	Linksys SGE2010P
Category	Network Router
Language	English