Cisco NCS-57C3-MOD-SYS User Manual

On the NCS-57C3-MOD chassis, the STATUS and ATTN LEDs are located on the lower-right of the chassis.
The SYNC and GNSS LEDs are located below the RPs.
See Route Processor Card LEDs, on page 103 for the NC57-MOD-RP2-E route processor LEDs.
Figure 78: NCS-57C3-MOD Chassis LEDs
Table 14: LED Descriptions
StatusColorLED
The module is operational and has no active major or critical alarms.GreenSTAT
The module is booting up.Blinking Amber
Host kernel booted and is ready to start XR.Amber
The module is powered-off.Off
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
102
LEDs
Chassis LEDs

Cisco NCS-57C3-MOD-SYS Specifications

General

Brand	Cisco
Model	NCS-57C3-MOD-SYS
Category	Network Router
Language	English