EasyManuals Logo
Home>Cisco>Network Hardware>PIX 515

Cisco PIX 515 User Manual

Cisco PIX 515
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
6-5
Cisco PIX Security Appliance Hardware Installation Guide
78-15170-03
Chapter 6 PIX 525
PIX 525 Feature Licenses
Step 6 Connect the network cables to the expansion interface ports. (The inside, outside, or perimeter network
connections can be made to any available interface port on the PIX 525.) The first expansion port
number, at the top left, is interface 2. Starting from that port and going from left to right and top to
bottom, the next port is interface 3, the next is interface 4, and so on. Refer to the “PIX 525 Feature
Licenses” section on page 6-5 for information on how to configure the ports.
Step 7 If you have a second PIX security appliance to use as a failover unit, install the failover feature and cable
as described in the “Installing Failover” section on page 6-6.
Note Do not power on the standby failover unit until the primary unit is configured.
Step 8 When you are ready to start the PIX 525, power on the unit from the switch at the rear of the unit.
PIX 525 Feature Licenses
If you have the PIX-525-UR unrestricted feature license, the following options are available:
If you have a second PIX 525 to use as a failover unit, install the failover feature and cable as
described in the “Installing Failover” section on page 6-6.
If needed, install the PIX security appliance syslog server as described on the logging command
page in the command reference online at:
http://cisco.com/en/US/products/sw/secursw/ps2120/prod_command_reference_list.html
If you need to install an optional circuit board, refer to the “Installing a Circuit Board in the
PIX 525” section on page 6-15.
If you need to install additional memory, refer to the “Installing a Memory Upgrade” section on
page 6-12.
For information on upgrading feature licenses or downloading the latest software versions, refer to the
configuration guide online at:
http://www.cisco.com/en/US/products/sw/secursw/ps2120/prod_configuration_guides_list.html
This section includes the following topics:
VPN Accelerator Card, page 6-6
VPN Accelerator Card+, page 6-6

Table of Contents

Other manuals for Cisco PIX 515

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco PIX 515 and is the answer not in the manual?

Cisco PIX 515 Specifications

General IconGeneral
BrandCisco
ModelPIX 515
CategoryNetwork Hardware
LanguageEnglish

Related product manuals