Cisco PTZ User Manual

4-11
Cisco Video Surveillance PTZ IP Camera Installation Guide
OL-28954-01
Chapter 4 Managing the Camera
Viewing Live Video
Preset & Home Position
Note Click on the title to access these controls.
You can configure a maximum of eight preset positions.
To add a preset position
• Click on the plus button.
• Enter a unique name for this preset position. The name can
contain from 1 to 64 characters, which can be letters,
numbers, and special characters, but no spaces. Special
characters are: ! % ( ) , - = @ _
~
• Click the Save button.
If you already configured the maximum amount of preset
positions, an error message displays.
To delete a preset position, use the trash button.
Note You cannot delete a preset position that is part of a
patrol list. Go to Patrol Settings to remove a preset
position from the patrol list.
To set one of the preset positions as the home position, click the
Set Current Home Position button.
To restore the default home position, click the Restore default
Home Position button.
Speed Control
Pan Speed—Use the slider to set the rate at which the camera
pans to the desired location. Values are 1 through 100. Default
is 50.
Tilt Speed—Use the slider to set the rate at which the camera
tilts. Values are 1 through 100. Default is 50.
Zoom Speed—Use the slider to set the rate at which the camera
zooms. Values are 1 through 100. Default is 50.
Focus Speed—Use the slider to set the rate at which the camera
focuses on a desired location. Values are 1 through 100. Default
is 50.
Auto Pan/Patrol Speed—Use the slider to set the rate at which
the camera automatically pans and patrols based on the patrol
list. Values are 1 through 100. Default is 50.
Table 4-7 Pan/Tilt/Zoom Settings (continued)
Control Description

Cisco PTZ Specifications

General

Brand	Cisco
Model	PTZ
Category	Security Camera
Language	English