Cisco PTZ User Manual

CHAPTER
1-1
Cisco Video Surveillance PTZ IP Camera Installation Guide
OL-28954-01
1
Overview
This chapter describes the Cisco Video Surveillance pan, tilt, and zoom (PTZ) IP cameras, and includes
the following topics:
• Introduction, page 1-1
• Package Contents, page 1-2
• PTZ IP Camera Physical Details, page 1-3
Introduction
The Cisco Video Surveillance PTZ IP cameras are primarily used for monitoring wide open outdoor
areas such as building entrances, airports, highways, and parking lots.
The dome cover protects the camera body against rain and dust. The wide temperature range allows the
camera to operate under extreme weather conditions.
The following PTZ IP cameras are available:
• Cisco Video Surveillance SD Outdoor 2830 PTZ IP Camera, NTSC
• Cisco Video Surveillance SD Outdoor 2835 PTZ IP Camera, PAL
• Cisco Video Surveillance HD Outdoor 6930 PTZ IP Camera
For installers, properly adjusting the focus of an HD IP camera can be difficult due to the image detail.
To make installation and adjustment easier, the PTZ IP camera incorporates built-in stepping motors that
the installer can use to remotely control the focal length and precisely adjust the camera focus.
For complete installation and tampering prevention, the PTZ IP camera also fits different conduits and
corrugated tubes sizes for cable installation.

Cisco PTZ Specifications

General

Brand	Cisco
Model	PTZ
Category	Security Camera
Language	English