Cisco Rugged Series User Manual

Cables and Adapters
SFP Module Cables
Each port must match the wave-length specifications on each end of the cable, and for reliable communications,
the cable must not exceed the allowable length.
For more information about SFP/SFP+ modules and cables, see Transceiver Modules .
Console Port Adapter Pinouts
The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide an
RJ-45-to-DB-9 adapter cable to connect the router console port to a PC console port. You need to provide an
RJ-45-to-DB-25 female DTE adapter if you want to connect the router console port to a terminal. You can
order an adapter (part number ACS-DSBUASYN=).
The following table shows the pinout descriptions for the DB-9 connections:
Table 14: Pinout Descriptions for the DB-9 Connections
Console DeviceRJ-45 to DB-9
Terminal Adapter
RJ-45 to RJ-45 Rollover CableConsole Port (DTE)
SignalDB-9 PinRJ-45 PinRJ-45 PinSignal
CTS881
3
RTS
DSR672DTR
RxD263TxD
GND554GND
GND545GND
TxD336RxD
DTR427DSR
RTS718CTS
3
Pin 1 is connected internally to Pin 8.
The following table shows the pinout descriptions for the DB-25 connections:
Table 15: Pinout Descriptions for the DB-25 Connections
Console DeviceRJ-45 to DB-25
Terminal Adapter
RJ-45 to RJ-45 Rollover CableConsole Port (DTE)
4
SignalDB-25 PinRJ-45 PinRJ-45 PinSignal
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
65
Cable and Connectors
Cables and Adapters

Cisco Rugged Series Specifications

General

Brand	Cisco
Model	Rugged Series
Category	Network Router
Language	English