Cisco SPA 504G Owner's Guide

6
Navigation button
Press an arrow key to scroll left, right,
up,
or down through items shown on the
IP
phone screen
7 Messages button
Press to access voice mail.
8 Hold Button
Press to place call on hold.
9 Setup button
Press
to access a menu to configure
features
and preferences (such as your
directory,
status, and speed dials), access
your call
history, set up functions (such
as
call forwarding), and provide phone
status
information.
10 Mute Button
Press
to mute or unmute the phone.
When
phone is muted, the button is lit
red.
A blinking or steady red mute
button
indicates the network connection
cannot
be found.
11 Volume Button
Press (+) to increase the volume and (-)
to
lower the volume of the handset,
headset,
speaker when the phone is
offhook,
or ringer volume when the
phone
is on-hook.
12 Headset Button Push to turn the headset on or off. When
the headset
is on, the button is lit green.
13 Speaker Button Push to turn the speaker on or off. When
the speaker
is on, the button is lit green.
14 Keypad Use to dial phone numbers, enter letters,
and
choose menu items.
Soft key Buttons your Cisco SPA504G Phone
This section contains information on the terms used when interacting with
your new Cisco SPA504G Desk Phone.
The soft key buttons on your phone display might vary depending on your
phone model and the phone system setup. Press the Right Arrow or Left Arrow
keys on the navigation button to view additional soft key buttons.
9

Cisco SPA 504G Specifications

General

Brand	Cisco
Model	SPA 504G
Category	IP Phone
Language	English