Cisco SPA100 Series Administration Guide

Configuring the Voice Settings
SSL/TLS Certificate
Cisco SPA100Series Administration Guide 105
4
SSL/TLS Certificate
Server Certification
If a device is upgraded to SW 1.3.3 or later, the provisioning server requests a
server certification signed by the Cisco 2K Small Business CA or can use the
certificate signed by 1K CA.
Cfwd Ring Splash
Len
Duration of ring splash when a call is forwarded (0 – 10.0s)
Default setting: 0
Cblk Ring Splash
Len
Duration of ring splash when a call is blocked (0 – 10.0s)
Default setting: 0
VMWI Ring Policy The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
indicating the status of the subscriber’s mail box. Three
settings are available.
Default setting: New VM Available
• New VM Available: Ring as long as there new
voicemail messages.
• New VM Becomes Available: Ring at the point when
the first new voicemail message is received.
• New VM Arrives: Ring when the number of new
voicemail messages increases.
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s)
Default setting: 0
Ring On No New
VM
If enabled, the ATA plays a ring splash when the voicemail
server sends SIP NOTIFY message to the ATA indicating
that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
Default setting: no
Field Description

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English