Name: Cisco SPA100 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Configuring the Voice Settings

Line1 and Line 2 Settings (PHONE Port1 and PHONE2)

Cisco SPA100Series Administration Guide 83

Line 1 and Line 2 Settings (PHONE Port1 and PHONE2)

Use the Voice > Line 1 and Voice > Line 2 pages to configure the settings for

calls through the PHONE 1 and PHONE2 ports.

or Line 2 Enter the settings as described below. After making changes, click

Submit to save your settings, or click Cancel to redisplay the page with the saved

settings.

NOTE In a configuration profile, the FXS parameters must be appended with the

appropriate numeral (for example, [1] or [2]) to identify the port to which the setting

applies.

Line Enable

Streaming Audio Server (SAS)

Force G722 Code Dial prefix to make G.722 the only codec that can be used

for the call.

Default setting: *02722

Field Description

Line Enable To enable this line for service, select yes. Otherwise,

select no.

Default setting: yes

Field Description

SAS Enable To enable the use of the line as a streaming audio source,

select yes. Otherwise, select no. If enabled, the line cannot

be used for outgoing calls. Instead, it auto-answers

incoming calls and streams audio RTP packets to the

caller.

Default setting: no

Cisco SPA100 Series Administration Guide

Other manuals for Cisco SPA100 Series