Cisco SPA100 Series Administration Guide

Getting Started
Mounting the ATA
Cisco SPA100Series Administration Guide 18
1
Mounting the ATA
You can place the ATA on a desktop or mount it on a wall.
!
CAUTION To prevent the ATA from overheating, do not operate it in an area that exceeds an
ambient temperature of 104°F (40°C).
Desktop Placement
Place the ATA on a flat surface near an electrical outlet.
WARNING Do not place anything on top of the ATA; excessive weight could damage it.
Set Line 2 SIP Transport 1921 0: UDP
1: TCP
2: TLS
Exit IVR 3948
Allow or prevent WAN
access to the
administration web server
7932 1: Enable
0: Disable
Factory Reset of Unit
WARNING: All non-default
settings will be lost. This
includes network and
service provider data.
73738
RESET
When prompted, press 1 to
confirm, or press * (star) to
cancel. After you hear
“Option successful,” hang
up the phone. The ATA
reboots.
Reboot of Voice System 732668
REBOOT
After you hear “Option
successful,” hang up the
phone. The ATA reboots.
IVR Action Menu
Option
Choices and Instructions

Cisco SPA100 Series Specifications

General

Brand	Cisco
Model	SPA100 Series
Category	Adapter
Language	English