Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3 Blade Server
12
CONFIGURING the SERVER
STEP 3 CHOOSE MEMORY
The standard memory features are:
■ DIMMs
— Clock speed: 1866, 1600, or 1333 MHz
— Ranks per DIMM: 1, 2, or 4
— Operational voltage: 1.35 or 1.5 V
—Registered
■ DDR3 ECC registered DIMMs (RDIMMs) or load-reduced DIMMS (LRDIMMS)
■ Memory is organized with four memory channels per CPU, with up to three DIMMs per
channel (DPC), as shown in
Figure 3. Maximum memory capacity is 768 GB (B200 M3
configured with 2 CPUs with 32 GB DIMMs).
Figure 3 UCS B200 M3 Memory Organization

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g