Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3 Blade Server
52
SUPPLEMENTAL MATERIAL
— QLogic M73KR-Q
■ Cisco Storage Accelerator adapters
— Cisco UCS 785 GB MLC Fusion-io ioDrive2
— LSI 400 GB SLC WarpDrive
The following sections explain the various I/O options that are possible with the different Fabric Extenders
(Cisco UCS 2208XP, 2204XP, and 2104XP) and the VIC 1240 and mezzanine adapters.
B200 M3 Configured with 1 CPU
In a B200 M3 configured with 1 CPU, the mezzanine card slot is not under the control of a CPU (in a B200 M3
configured with 2 CPUs, CPU 2 controls the slot). Therefore, the only adapter that can be placed in the
mezzanine slot in a B200 M3 configured with 1 CPU is the Cisco UCS Port Expander Card for VIC 1240, and
the VIC 1240 is always required to be installed in the VIC 1240 slot.
Connectivity using the Cisco UCS 2208XP Fabric Extender
The Cisco UCS 2208XP is the second-generation Fabric Extender, and shares the same form factor as the
current UCS 2100 series. The 2208XP is backwards compatible with the UCS 5108 Blade server chassis.
The options shown in Figure 10 and Figure 11 demonstrate how the server uses these options:
■ VIC 1240 to 2208XP
■ VIC 1240 plus Port Expander Card for VIC 1240 to 2208XP
In Figure 10, two ports from the VIC 1240 are channeled to 2208XP Fabric Extender A and two are
channeled to 2208XP Fabric Extender B. The result is 20 Gbps of bandwidth to each Fabric Extender.
Figure 10 Option 1 - VIC 1240 to UCS 2208XP Fabric Extender (no mezzanine adapter)

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g