Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3 Blade Server
48
SUPPLEMENTAL MATERIAL
NEBS Compliance
When configured with the specific set of components shown in Table 30, the UCS B200 M3 blade server
meets Network Building Equipment Standards (NEBS) Level 1 and Level 3 compliance.
Table 30 B200 M3 NEBS Compliant Components
Component
Category
Description Product ID (PID)
CPUs Up to two CPUs: Intel Xeon E5-2658v 2 .40 GHz 95W
10C/25MB Cache
UCS-CPU-E52658B
Up to two CPUs: Intel Xeon E5-2658 2.10 GHz 95W
8C/20MB Cache
UCS-CPU-E5-2658
DIMMs Up to 24: 8 GB DIMMs 1666MHz UCS-MR-1X082RY-A
Up to 24: 16 GB DIMMS 1666MHz UCS-MR-1X162RY-A
Up to 24: 8 GB DIMMs 1866MHz UCS-MR-1X082RZ-A
Up to 24: 16 GB DIMMS 1866MHz UCS-MR-1X162RZ-A
RAID Controller Integrated RAID —
HDDs Up to two: 300 GB 15K RPM SAS drives
(600GB maximum total capacity)
UCS-HDD300GI2F105
Up to two: 600 GB 10K RPM SAS drives
(1.2 TB maximum total capacity)
A03-D600GA2
Mezzanine Cards Cisco UCS VIC 1240 adapter for M3 blade servers UCSB-MLOM-40G-01
Cisco UCS Port Expander Card for VIC 1240 UCSB-MLOM-PT-01

Cisco UCS B200 M3 Specifications

General

System bus rate	8 GT/s
Processor family	Intel
Processor socket	LGA 2011 (Socket R)
Intel Xeon series	E5-2600
Motherboard chipset	Intel C600
Compatible processor series	Intel® Xeon®
Number of processors supported	2
ECC	Yes
Memory form factor	240-pin DIMM
Number of DIMM slots	24
Supported memory types	DDR3-SDRAM
Maximum internal memory	768 GB
RAID levels	0, 1
Storage drive sizes supported	2.5 \
Supported storage drive interfaces	Serial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity	0
On-board graphics card model	Matrox G200
Chassis type	-
Product color	Silver
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	5 - 93 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	620 mm
Width	203 mm
Height	50 mm
Weight	4360 g