EasyManuals Logo
Home>Cisco>Server>UCS B200 M3

Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Cisco UCS B200 M3 Blade Server
SUPPLEMENTAL MATERIAL
45
Upgrade and Servicing-Related Parts
This section lists the upgrade and servicing-related parts you may need during the life of your server. Some
of these parts are configured with every server or with every UCS 5108 blade server chassis, and some may
be ordered when needed or may be ordered and kept on hand as spares for future use. See
Table 29.
Drive and Blade Server Blanking Panels
A drive blanking panel (N20-BBLKD=) must be installed if you remove a disk drive from a UCS server.
Similarly, a blade server blanking panel (N20-CBLKB1=) must be installed if you remove a half-width blade
server (such as a UCS B200 M3 server) from a blade server chassis. These panels are required to maintain
system temperatures at safe operating levels, and to keep dust away from system components.
Upgrading your Server from Intel Xeon E5-2600 to Intel Xeon E5-2600 v2 CPUs (or
downgrading from Intel Xeon E5-2600 v2 to Intel Xeon E5-2600 CPUs)
See the following link:
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/CPU/IVB/install/IVB-B.html
Table 29 Upgrade and Servicing-related Parts for UCS B200 M3 Server
Spare Product ID (PID) Description
N20-BBLKD=
2.5-inch HDD Blanking Panel
1
Notes...
1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of
your server).
N20-CBLKB1=
Blade slot blanking panel for UCS 5108/single slot
2
UCSB-HS-01-EP=
CPU Heat Sink for UCS B200 M3 and B420 M3
1
UCSB-BAFF-B200-M3=
Air Baffle Replacement Kit for B200 M3 Server
1
N20-MBLIBATT=
Replacement Lithium Battery for Server Motherboard (CR2032)
1
N20-BKVM=
KVM local IO cable for UCS servers console port
2
2. This part is included/configured with the UCS 5108 blade server chassis.
UCS-CPU-EP-PNP=
Pick n place CPU tools for M3/EP 10/8/6/4/2 core CPUs (Green)
3
3. This part is included with the purchase of each optional or spare Intel Xeon E5-2600 CPU processor kit.
UCS-CPU-EP2-PNP=
Pick n place CPU tools for M3/EP v2 12 core CPUs (Purple)
4
4. This part is included with the purchase of each optional or spare Intel Xeon E5-2600 v2 CPU processor kit.
UCS-CPU-GREASE=
Thermal grease-for 2 CPUs-all but C220/C240-Blue tip syringe
3
UCSX-HSCK=
UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)
3

Table of Contents

Other manuals for Cisco UCS B200 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS B200 M3 and is the answer not in the manual?

Cisco UCS B200 M3 Specifications

General IconGeneral
System bus rate8 GT/s
Processor familyIntel
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Motherboard chipsetIntel C600
Compatible processor seriesIntel® Xeon®
Number of processors supported2
ECCYes
Memory form factor240-pin DIMM
Number of DIMM slots24
Supported memory typesDDR3-SDRAM
Maximum internal memory768 GB
RAID levels0, 1
Storage drive sizes supported2.5 \
Supported storage drive interfacesSerial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity0
On-board graphics card modelMatrox G200
Chassis type-
Product colorSilver
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)5 - 93 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width203 mm
Height50 mm
Weight4360 g

Related product manuals