EasyManuals Logo
Home>Cisco>Server>UCS B200 M3

Cisco UCS B200 M3 User Manual

Cisco UCS B200 M3
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Cisco UCS B200 M3 Blade Server
22
CONFIGURING the SERVER
(2) B200 M3 configured with 2 CPUs
For a B200 M3 configured with 2 CPUs, the supported configurations are listed in Table 11.
Choose one configuration.
Also see NEBS Compliance on page 48 for more information.
To help ensure that your operating system is compatible with the adapter you have selected,
please check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
Caveats
If a VIC 1240 adapter is not installed, you must choose an Emulex or QLogic I/O adapter to
be installed in the mezzanine slot (see also
NEBS Compliance on page 48)
Table 11 Supported VIC 1240 and Mezzanine Adapter Configurations
Fabric
Extender
Compatibility
Adapter in
VIC 1240 Slot
Adapter in Mezzanine Slot Ports Reference
2208XP (PIDs UCS-IOM-2208XP, UCS-IOM2208-16FET)
2208XP VIC 1240 None 4 x 10 Gb Figure 15 on page 56
2208XP VIC 1240 VIC 1280 8 x 10 Gb Figure 16 on page 57
2208XP VIC 1240 Emulex or QLogic I/O adapter, or
Cisco UCS Storage Accelerator
6 x 10 Gb
4 x 10 Gb
Figure 17 on page 57
2208XP VIC 1240 Port Expander Card for VIC 1240 8 x 10 Gb Figure 18 on page 58
2208XP None
Emulex or QLogic I/O adapter
1
Notes...
1. Specifically, the UCSB-MEZ-QLG-03 (QLogic) or UCSB-MEZ-ELX-03 (Emulex) adapter
2 x 10 Gb Figure 19 on page 58
2204XP (PIDs UCS-IOM-2204XP, UCS-IOM2204-8FET)
2204XP VIC 1240 None 2 x 10 Gb Figure 20 on page 59
2204XP VIC 1240 VIC 1280 4 x 10 Gb Figure 21 on page 60
2204XP VIC 1240 Emulex or QLogic I/O adapter, or
Cisco UCS Storage Accelerator
4 x 10 Gb
4 x 10 Gb
Figure 22 on page 60
2204XP VIC 1240 Port Expander Card for VIC 1240 4 x 10 Gb Figure 23 on page 61
2204XP None
Emulex or QLogic I/O adapter
1
2 x 10 Gb Figure 24 on page 61
2104XP (PID N20-I6584)
2104XP VIC 1240 None 2 x 10 Gb Figure 25 on page 62
2104XP VIC 1240 Cisco UCS Storage Accelerator 2 x 10 Gb Figure 26 on page 62

Table of Contents

Other manuals for Cisco UCS B200 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS B200 M3 and is the answer not in the manual?

Cisco UCS B200 M3 Specifications

General IconGeneral
System bus rate8 GT/s
Processor familyIntel
Processor socketLGA 2011 (Socket R)
Intel Xeon seriesE5-2600
Motherboard chipsetIntel C600
Compatible processor seriesIntel® Xeon®
Number of processors supported2
ECCYes
Memory form factor240-pin DIMM
Number of DIMM slots24
Supported memory typesDDR3-SDRAM
Maximum internal memory768 GB
RAID levels0, 1
Storage drive sizes supported2.5 \
Supported storage drive interfacesSerial Attached SCSI (SAS), Serial ATA III
USB 2.0 ports quantity0
On-board graphics card modelMatrox G200
Chassis type-
Product colorSilver
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)5 - 93 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width203 mm
Height50 mm
Weight4360 g

Related product manuals