Cisco Valet M10 User Manual

2
Chapter 1: Valet
User Guide
Back
The Internet Port connects to the network (Ethernet)
cable from your Internet connection. In most cases
you will be connecting one end of the network cable
to the Ethernet port on your cable or DSL modem and
the other end to the Internet port on your Valet.
Ethernet Ports connect the Valet to computers or
other devices that have Ethernet ports such as gaming
consoles, HDTVs, Blu-ray disc players, or printers using
network (Ethernet) cables.
The Reset Button resets the Valet to its
factory default settings when held for
approximately ten seconds.
The Power Port connects the
power adapter.
Easy Setup Key
The Easy Setup Key is used to install
the Cisco Connect software on your
computer(s). Be sure to store it in
a safe place so that you can add
additional computers in the future.

Cisco Valet M10 Specifications

General

Brand	Cisco
Model	Valet M10
Category	Wireless Router
Language	English