COMENDA AC1 Series User Manual

EN
User instructions
2.2.g DHM2+ module with R.e.d. External debris recovery (Optional)
Self-cleaning and drain (cycle duration 1')
1. Machine on and stopped.
Selector “Q2” in position “I” and button “S1”
off.
2. Remove the lters as in the images.
Press the "S26" button.
The “H26” light coming on indicates
its activation.
At the end of the drain cycle, the "H26" light
swith off.
2.2.h HPS EASY / HPS EASY PLUS (with USB) (Optional)
Energy consumption monitoring system
The system is modular and consists of:
• electronic meter of energy consumption and rinse water with signalling of anomalies;
• water volume consumption;
• User interface with LCD display and 2 buttons.
2.2.h.1 Functions
The system is designed to monitor and display the following machine operating conditions via the LCD display:
• machine ON;
• machine READY;
• machine in operation.
In the presence of operating anomalies, by checking certain diagnostic signals and comparing them with specic
reference parameters for each machine, it is possible to view an alarm message:
• insufcient washing water temperatures;
• insufcient rinse water ow;
• insufcient rinse water temperature;
• faulty rinse water solenoid valve (HPS EASY PLUS).
The system measures the rinse water ow rate, the electricity used and the machine start-up and operating
times.
The measurements taken are analysed to display the following information on the LCD display:
• total rinse water consumption (m3);
• partial rinse water consumption (l);
• total electricity consumption (kWh);
• partial electricity consumption (kWh);
• total ignition time (h);
• total operating time (h);
• total rinse time (h).
22

COMENDA AC1 Series Specifications

General

Brand	COMENDA
Model	AC1 Series
Category	Dishwasher
Language	English