Installation and maintenance instructions
EN
2.3 ELETTRICAL INFORMATIONS
A1 Control console
A2 Printed circuit board
B2 Sensor for booster temperature
B3 Sensor for tank temperature
C1 Antinoise Filter
E2 Boiler heater
E3 Tank heater
F Main fuse
FA2 Printed circuit fuse
FKE2 Booster heater fuses
FKE3 Tank heater fuses
F3 Wash pump overload relay
F3a Second wash pump overload relay
K1 Main relay
KE2 Booster heater contactor/relayr
KE2b Booster heater safety contactor
KE3 Tank heater contactor/relay
KM2 Rinse pump contactor
KM3 Wash pump contactor
KM3a Second wash pump contactoro
M2 Rinse booster pump
M2 Second rinse booster pump
M3 Wash pump
M3a Second wash pump
M5 Drain pump (by request)
MB Rinse-aid dispenser (by request)
MD Detergent dispenser (by request)
S1 Door microswitch
S2 Tank pressure switch
S11 Break tank minimum level oat reed
SE2b Booster heater safety thermostat
Y11 Break tank solenoid valve
Y2 Tank ll/rinse solenoid valve
X1 Terminal block
49
To Next Page
Loading...
Need help?
General
