USB to Serial Converters Manual
Version 2.0
Document Reference No.: CP_000032 Clearance No.: CP#022
Copyright © Connective Peripherals Pte Ltd 46
Figure 30 - CDM Uninstaller – Adding to list
7. Finally, click ‘Remove Devices’ at the bottom of the Window and the drivers for all FTDI
converters will be removed. You will get one or more message boxes popping up (see Figure 31)
to confirm this.
Figure 31 - CDM Uninstaller – Device removed
8. Once the drivers have all been uninstalled (the large text box will be blank again like Figure 28
above and the status message will be back to ‘ready’) you can close the program.
9. It is recommended to re-start the PC at this stage.
10. You can now proceed to install the latest driver using the instructions in section 4
7.3 Device
Driver
Options
Some common Windows Device Driver issues can be resolved by changing the advanced driver options.
• Device Times Out
To Next Page
Loading...
Need help?
General
