11
Superheated steam
Operating Instructions OSC
Proceed as follows:
1. Switch on the CONVOTHERM with the key .
2. Press key
R The default settings for
superheated steam appear on the display.
Press key to start immediately with the
displayed values.
or:
3. Press key
R The cooking chamber
temperature appears on the display. Set the
desired cooking chamber temperature between
100°C and 250°C with the dial or the keys
and .
4. Press key
R Set the desired cooking time.
Core temperature option, see OSP and
OSG)
5. Press key
R The cooking programme
‘Superheated steam’ is started. The set
cooking chamber temperature and remaining
cooking time appear on the display.
6. To change the set values during operation,
press keys and correct the values.
7. Read off the set cooking time by pressing
key once.
8. When the cooking time has expired, the buzzer
sounds and the cooking programme is termina-
ted. Press key or open the door.
Operating Instructions OSP and OSG
Proceed as follows:
1. Switch on the CONVOTHERM with the key .
2. Press key
R The last set values or the de-
fault settings for superheated steaming appear
on the display.
Press key to start immediately with the dis-
played values.
or:
3. Press key
R The cooking chamber
temperature appears on the display. Set the
desired cooking chamber temperature between
100°C and 250°C with the dial or the keys
and .
4. Cooking time or core temperature mode:
■ Cooking time:
Press key
R Set the desired cooking
time or continuous operation (> 9:59).
■ Core temperature:
Press key
R Set the desired core tem-
perature.
5.
Press key R The cooking programme ‘Super-
heated steam’ is started. The set cooking cham-
ber temperature and remaining cooking time or
the actual core temperature appear on the dis-
play.
6. To change the set values during operation, press
keys and correct the values.
7.
Read off the actual cooking chamber temperatu-
re, set cooking time or set core temperature by
pressing the corresponding key once or twice.
8. When the cooking time has expired or the set
core temperature is reached, the buzzer sounds
and the cooking programme is terminated.
Press key or open the door.
Note
To check the current core temperature during coo-
king time mode, press key and hold depressed.
At the same time, press key . The current core
temperature is shown at the top of the display.
OSP/OSGOSC
Cooking with the CONVOTHERM
Use the cooking programme ‘Superheated steam’ to roast
your large roasts and bake your cakes.
Mr.C recommends:
Application examples and cooking recommen-
dations can be found in section “Practical tips”.
To Next Page
Loading...
Need help?
General
