18
OSP
Cooking with the CONVOTHERM
Mr.C recommends:
Use the demoisturising function for short roasts,
damp fruit cakes, moussaka, schnitzels,
gratinating of roasts and gratinées.
Mr.C recommends:
Always preheat sufficiently for baking and
regenerating and for short roasts to a tempe-
rature of 20 – 30°C above the later set cooking
temperature.
Demoisturising
Use the demoisturising function for very moist
foodstuffs. Excess moisture is drawn out of the
cooking chamber and the product.
Operating Instructions OSP
1. Press the key in the Clima display R Demoistu-
rising is activated. The blue display (in the Clima
display) goes out. The symbol lights up.
2. You can activate or deactivate the demoisturi-
sing function at any time during cooking simply
by pressing the key in the Clima display.
Note
■ Demoisturising is possible only in the cooking
programmes ‘Convection’ and ‘Superheated
steam’.
■ Demoisturising can be combined at random
with further auxiliary functions.
■ Demoisturising is programmable, i.e. you can
include it in cooking recipes.
■ At the end of the cooking programme, the
CONVOTHERM automatically switches demoi-
sturising back to the standard setting.
All further auxiliary functions are
activated via Mr.C.
■ Mr.C functions can be selected at any time
during cooking mode by pressing the key
and then be activated or deactivated.
■ Mr.C functions can be combined at random.
■ Mr.C functions (except ‘add moisture’) are
programmable, i.e. you can include them in
cooking recipes.
■ After finishing the cooking programme, the
CONVOTHERM automatically switches the
selected auxiliary function (except the key lock)
back to the standard setting.
■ You can quit the Mr.C selection menu again at
any time by pressing the key .
Preheating
The preheating programme allows you to preheat
the CONVOTHERM for the meal production.
This gives you optimum production reliability.
Operating Instructions OSP and OSG
1. Press key R Selection possibilities
appear on the display. Select ‘Preheating’
with the setting switch or keys and
and confirm by pressing key again.
2. Confirm ‘Yes’ with the key .
3. Press key
R Set the preheating
temperature.
4. Press key
R Set the preheating time.
5. Press key
R The CONVOTHERM starts the
preheating programme.
OSP/OSG