17
Auxiliary functions
Note
If you wish to quit the function prematurely, press
key . The pre-select start time is deleted.
OSP/OSG
Cooking with the CONVOTHERM
Pre-select start time
With the starting time preselection you determine
when the CONVOTHERM is to automatically start
the desired cooking programme, cooking idea or
cooking recipe.
Note that the cooling process of your foodstuffs is
interrupted by the starting time preselection.
Operating Instructions OSP and OSG
1. Press key and hold depressed. At the same
time, turn the dial
R The following times, for
example, appear on the display:
Explanation of the example
■ Top: Total cooking time (the value is displayed
only in cooking time mode)
■ Bottom left: The CONVOTHERM starts after
48 minutes (display in cooking time and core
temperature mode)
■ Bottom middle: Starting time 10:23 h (display
in cooking time and core temperature mode)
■ Bottom right: End of cooking time 11:23 h (dis-
play of the value only in cooking time mode)
2. Hold key depressed and at the same time
turn the setting switch to select the starting
time and end of cooking (cooking time mode
only).
3. The CONVOTHERM switches automatically
to the pre-select start time when key is
released.
4. To change the set pre-select start time, hold key
depressed and correct the value with the
dial.
5. When the starting time is reached, the selected
cooking programme is started automatically.
The CONVOTHERM offers further functions to help you optimise your
day-to-day work in the kitchen and the cooking process.
Mr.C recommends:
■ Use this auxiliary function to avoid bottlenecks
in production and preparation.
■ You can prepare food as normal, load the
CONVOTHERM, set the desired cooking pro-
gramme and cooking time or the core tempera-
ture long before the cooking process is to start.
To Next Page
Loading...
Need help?
General
