9
OSP/OSG
Operating elements and their function
Cooking chamber temperature (18)
■ Set the required cooking chamber
temperature
■ Read off the actual or set cooking
chamber temperature
Cooking time (19)
■ Set the cooking time from 1 minute to
9h 59 min or continuous mode (> 9:59)
■ Read off the actual or set cooking time
■ Call up the starting time preselection
■ Read off the expired cooking time with
core temperature measurement
Core temperature (option with OSG) (20)
■ Setting the required core temperature
■
Read off the actual or set core temperature
■ Read off the actual core temperature
during cooking time mode
Scroll left or scroll right (21/22)
■ Operating functions in Normal mode:
– Function as for the setting switch
■ Operating function in Programming
mode:
– One step forward or back (scroll)
Digital dial (23)
■ Setting possibilities in Normal mode:
– Cooking chamber temperature
– Cooking time
– Core temperature
■ Input possibilities in Programming
mode:
– Programme number
– Programme name
■ Selection of the Mr.C functions and edit-
ing functions as well as the list entries
in the cookbook
Pictogram control with LED (24)
■ Start stored cooking recipes directly
■ LED alongside key lights up when the
corresponding cooking recipe is started
Clima display (25)
■ CLOSED SYSTEM lights up when the
CONVOTHERM is started
■ The red display pulses during active
cooking chamber heating
■ The blue display pulses during steam
injection
■ Only the red display is lit during
demoisturising
Demoisturising key (middle) for
CONVOTHERM OSP (26)
■ Activate and deactivate demoisturising
Note
Magnetic door switch
If you open the cooking chamber door during the
programme, the magnetic door switch automatically
interrupts the cooking programme. The cooking time
does not continue to run. The CONVOTHERM auto-
matically restarts the cooking programme when the
cooking chamber door is closed.
If you open the cooking chamber door at the
end of the cooking programme when the buzzer
sounds, the buzzer stops automatically.