Crestron PRO3 Supplemental Guide

About
Select
About
to display the
About
menu. The
About
menu displays the PRO3’s IP address,
hostname, MAC address and firmware details.
About Menu
To view firmware details, press up or down on the Nav Pad to highlight
Firmware Details
,
and then press the center button of the Nav Pad.
To cancel and return to the previous menu, press
BACK
.
Ethernet Settings
Select
Ethernet Settings
to display the
Ethernet Settings
menu. The
Ethernet Setings
menu displays the status of the Ethernet connection (
Link
, green indicates active) and
provides options to view and configure settings for the LAN connection, the control subnet,
DNS servers, ports, webserver, SSL, MyCrestron, and Ethernet Diagnostics. Press up or
down on the Nav Pad to highlight the desired selection, and then press the center button of
the Nav Pad to select it.
Ethernet Settings Menu
LAN
Select
LAN
from the
Ethernet Settings
menu to edit settings for the LAN connection. The
LAN Settings
menu is displayed.
If any changes are made, the PRO3 must be rebooted. For details on rebooting the PRO3,
refer to “Reboot” on page 15.
About
IP Address: 172.30.16.25
Hostname: PRO3-7F28F5E6
MAC Address: 00:10:7e:26:f6:c3
Firmware Version: v1.010.0060
Firmware Details
Ethernet Settings
LAN
Link
Control Subnet
DNS Servers
Advanced Settings
MyCrestron
2 • PRO3: 3-Series Control System Supplemental Guide – DOC. 7330D

Crestron PRO3 Specifications

General

Brand	Crestron
Model	PRO3
Category	Control Systems
Language	English