6D-Link DIR-885L User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1
1 Mode Switch
Select between Router and Extender modes. To change modes, move the switch to the desired position and
after 5 seconds the router will reboot into the desired mode. Router is the default mode.
2 Reset Button Press the button and hold for at least 10 seconds to reset the router to the factory default settings.
3 WPS Button Press to start the WPS process and automatically create a secure connection to a WPS client.
4 USB 3.0 Port Connect a USB ash drive to share content , or connect it to a USB printer to share it on your network.
5 Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.
6 Gigabit Internet Port Using an Ethernet cable, connect your broadband modem to this port.
7 Power Button Press the power button to power on and o.
8 Power Connector Connector for the supplied power adapter.
2 3 4 5 6
7 8
To Next Page
Loading...