69D-Link DIR-818LW User Manual
Section 3 - Conguration
6rd
Select 6rd from the drop-down menu.
Enter the address settings supplied by your Internet Service
provider (ISP).
Enter the primary and secondary IPv6 DNS Server addresses.
Enter the LAN (local) IPv6 Address for the router.
Displays the router’s LAN IPv6 Link-Local Address.
Check to enable the Autoconguration feature.
Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or Stateful
DHCPv6.
Enter the start IPv6 Address for the DHCPv6 range for your local
computers.
Enter the end IPv6 Address for the DHCPv6 range for your local
computers.
Enter the Router Advertisement Lifetime (in minutes).
Click Save Settings.
My IPv6 Connection is:
WAN IPv6 Address
Settings:
Primary/Secondary
IPv6 DNS Servers:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
address assignment:
Autoconguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime: