94D-Link DIR-818LW User Manual
Section 3 - Conguration
Admin
This screen allows you to change the Administrator settings, and also to enable Remote Management.
Tools
Enter a new Password for the Admin account. Enter it again to verify the
password.
Check the box to Enable a challenge-response test requiring users to
type characters from a distorted image displayed on the screen to prevent
hackers and unauthorized users from gaining access to your router’s network
settings.
Check to Enable HTTPS to connect to the router securely. This means to
connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Check to Enable Remote Management, which allows the DIR-818LW to
be congured from the Internet using a web browser. A username and
password is still required to access the Web Management interface.
You can specify a port number used in the URL to access the DIR-818LW. For
example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the
DIR-818LW and 8080 is the port used for the Web Management interface.
If you check the box to enable the HTTPS Server, you must enter https://
as part of the URL to access the router remotely.
Select Allow All or Deny All from the drop-down menu. You can also create
a new lter from the Advanced > Inbound Filter screen.
This eld will display the current Remote Admin Inbound Filter.
Click Save Settings.
Admin Password:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Remote Admin
Inbound Filter:
Details:
To Next Page
Loading...
Need help?
Network Interfaces
