D-Link DAP-1350 User Manual

11D-Link DAP-1350 User Manual
Section 1 - Product Overview
Hardware Overview
Side
USB Port
The USB port is used to connect
USB devices such as a printer
to share on your network.
Bottom
WPS Button/LED
Press to start the WPS process. You
will have 120 seconds to start the WPS
process on another wireless device.
When enabling WPS, the light will blink
during broadcast. Once connected, the
LED will stay solid for 5 seconds and
then turn off.
Reset Button
Press and hold to reset the
device back to the factory
default settings
Stand

D-Link DAP-1350 Specifications

General

Maximum data transfer rate	100 Mbit/s
Wireless technology	802.11n
DHCP client	Yes
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2
Package weight	570 g
Certification	-FCC Class B, Wi-Fi, IC
LED indicators	LAN
Antenna features	Integrated antenna

Weight and Dimensions

Weight	230 g
Dimensions (WxDxH)	91.4 x 20.3 x 66 mm