29D-Link DAP-1350 User Manual
Section 3 - Configuration
LAN Connection Type:
IP Address:
Subnet Mask:
Default Gateway:
Device Name:
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The
default IP address is 192.168.0.50. If you
change the IP address, once you click Apply,
you will need to enter the new IP address in
your browser to get back into the configuration
utility.
Enter the Subnet Mask.
Enter the Gateway. This is usually the LAN or
internal IP address of your router.
Enter the Device Name of the AP. It is
recommended to change the Device Name if
there is more than one D-Link device within
the subnet. You can enter the device name of
the AP into your web browser to access the
instead of IP address for configuration. If you
are using the device name to connect, make
sure that your PC and your DAP-1350 are on
the same network.
Static IP
Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
