D-Link DAP-1350 User Manual

35D-Link DAP-1350 User Manual
Section 3 - Configuration
Browse:
Upload:
After you have downloaded the new firmware, click
Browse to locate the firmware update on your
hard drive. Click Upload to complete the firmware
upgrade.
Once you have a firmware update on your computer,
use this option to browse for the file and then upload
the information into the access point.
Firmware
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard
drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link
support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard
drive from this site.
After you have downloaded the new language
pack, click Browse to locate the language pack file
on your hard drive. Click Upload to complete the
language pack upgrade.
Note: In most cases you must unzip the file first
before uploading.
Language Pack
You can change the language of the web UI by uploading
available language packs.
Browse:

D-Link DAP-1350 Specifications

General

Maximum data transfer rate	100 Mbit/s
Wireless technology	802.11n
DHCP client	Yes
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2
Package weight	570 g
Certification	-FCC Class B, Wi-Fi, IC
LED indicators	LAN
Antenna features	Integrated antenna

Weight and Dimensions

Weight	230 g
Dimensions (WxDxH)	91.4 x 20.3 x 66 mm