D-Link DAP-1350 User Manual

89D-Link DAP-1350 User Manual
Section 3 - Configuration
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter
the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup
and has a configuration button, you can add it to the network by pressing the configuration button on the device and then
the on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A
registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup
button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Start the wizard.
Add Wireless
Station:
Add Wireless
Device Wizard:

D-Link DAP-1350 Specifications

General

Maximum data transfer rate	100 Mbit/s
Wireless technology	802.11n
DHCP client	Yes
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2
Package weight	570 g
Certification	-FCC Class B, Wi-Fi, IC
LED indicators	LAN
Antenna features	Integrated antenna

Weight and Dimensions

Weight	230 g
Dimensions (WxDxH)	91.4 x 20.3 x 66 mm