D-Link DAP-2230 User Manual

16D-Link DAP-2230 User Manual
Section 3 - Conguration
Basic Settings
Wireless
Access Point mode
Wireless
Band:
Select 2.4 Ghz from the drop-down menu.
Mode: Select Access Point from the drop-down menu.
The other three choices are WDS with AP, WDS, and wireless Client.
Network
Name
(SSID):
Service Set Identier (SSID) is the name designated for a specic wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
SSID
Visibility:
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users. This feature
is enabled by default.
Auto
Channel
Selection:
Enabling this feature automatically selects the channel that provides the
best wireless performance. Enable is set by default. The channel selection
process only occurs when the AP is booting up.
Channel: All devices on the network must share the same channel. To change the
channel, rst toggle the Auto Channel Selection setting to Disable, and then
use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless
settings.

D-Link DAP-2230 Specifications

General

Brand	D-Link
Model	DAP-2230
Category	Wireless Access Point
Language	English