D-Link DAP-2230 User Manual

32D-Link DAP-2230 User Manual
Section 3 - Conguration
Wireless Resource Control
The Wireless Resource Control window is used to congure the wireless connection settings so that devices can detect and
connect to the Access Point with the strongest signal.
Wireless band: Select 2.4 Ghz.
Connection
Limit:
Select Enable or Disable. This is an option for load balancing. This de-
termines whether to limit the number of users accessing this device. The
exact number is entered in the User Limit eld below. This feature allows
the user to share the wireless network trac and the client using multiple
APs. If this function is enabled and when the number of users exceeds this
value, or the network utilization of this AP exceeds the percentage that
has been specied, the DAP-2230 will not allow clients to associate with
the AP.
User Limit: Set the maximum amount of users that are allowed access (zero to 64 us-
ers) to the device using the specied wireless band. The default setting is
20.
11n
Preferred:
Use the drop-down menu to Enable the 11n Preferred function. The wire-
less clients with 802.11n protocol will have higher priority to connect to
the device.
Network
Utilization:
Set the maximum utilization of this access point. The DAP-2230 will not
allow any new clients to associate with the AP if the utilization exceeds
the specied value. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached,
the device will pause for one minute to allow network congestion to dis-
sipate.
Aging out: Use the drop-down menu to select the criteria of disconnecting the wire-
less clients. Available options are RSSI and Data Rate.

D-Link DAP-2230 Specifications

General

Brand	D-Link
Model	DAP-2230
Category	Wireless Access Point
Language	English