D-Link DAP-2230 User Manual

28D-Link DAP-2230 User Manual
Section 3 - Conguration
LAN
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for
the DAP-2230. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Get IP From: Static IP (Manual) is chosen here. Choose this option if you do not have a
DHCP server in your network, or if you wish to assign a static IP address to
the DAP-2230. When Dynamic IP (DHCP) is selected, the other elds here
will be grayed out. Please allow about two minutes for the DHCP client to
be functional once this selection is made.
IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within
the IP address range of your network.
Subnet
Mask:
Enter the subnet mask. All devices in the network must share the same
subnet mask.
Default
Gateway:
Enter the IP address of the gateway in your network. If there is a gateway in
your network, please enter an IP address within the range of your network.
DNS: Enter the DNS IP address used here.

D-Link DAP-2230 Specifications

General

Brand	D-Link
Model	DAP-2230
Category	Wireless Access Point
Language	English