D-Link DCS-100 User Manual

14D-Link D-ViewCam User Manual
Section 2 - Installation
15. Select one of the IP cameras that are available. You may enter
a new name for this camera and then enter the username
and password assigned to this camera. Click OK to add the
camera.
16. If your camera(s) do not support UPnP or your camera(s)
were not found, you can manually add a camera.
Click Insert to manually add IP Camera(s) that are on your
local area network (LAN).

D-Link DCS-100 Specifications

General

Brand	D-Link
Model	DCS-100
Category	Software
Language	English