D-Link DCS-100 User Manual

77D-Link D-ViewCam User Manual
Section 3 - Conguration
General Motion
Detect any movement in the dened detection zone.
Alarm Event Option:
• Sensitivity: Click and move the slider control to the right to increase sensitivity so that a relatively small movement will
trigger the alarm. Move the bar to the left to reduce the sensitivity of movement detection. Set up an appropriate Sensitivity
value will reduce the chance of false alarm. For example, you can lower the Sensitivity to avoid the alarm being triggered
by a swinging tree in the breeze.
• Interval: Click and move the slider control to the right to increase interval time so that the alarm will only be triggered when
the movement lasts longer. Move to the left to reduce the interval time.
Region Denition:
• Dene detection zone: To detect General Motion, you have to dene a detection zone. Left-click and drag the mouse to
draw a detection zone. You may dene more than one zone on the screen by repeating the same process. You can also
click on the All button to select the entire detection zone.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.

D-Link DCS-100 Specifications

General

Brand	D-Link
Model	DCS-100
Category	Software
Language	English