D-Link DCS-100 User Manual

7D-Link D-ViewCam User Manual
Section 1 - Product Overview
Installing Your IP Camera
Before installing D-ViewCam, please make sure you have installed your D-Link IP camera(s) that will be managed by
D-ViewCam.
Step 1 - Follow the installation procedures that came with your IP camera(s) to complete the camera
installation process.
Step 2 - Verify that you are able to view the video images from the IP camera(s) by accessing the
camera’s web-based conguration utility. It is recommended that all IP cameras be installed in
the same subnet as your management PC running the D-ViewCam software.
Step 3 - Please refer to page 14 to add IP camera(s) to the D-ViewCam system.
Note: D-ViewCam is optimized for a small-scale LAN environment. To protect the system and cameras from attacks from
the Internet, install the D-ViewCam software on a computer that is protected behind a rewall or an IP sharing device.

D-Link DCS-100 Specifications

General

Brand	D-Link
Model	DCS-100
Category	Software
Language	English