D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual

D-Link DGE-560T User Manual 8
1. After you have installed the network adapter in your computer, boot Windows Server 2003. The window “Welcome to Found
New Hardware Wizard” is displayed. On the screen the menu “Can Windows connect to Windows Update to search for
software” is displayed.
If you are installing the driver using Windows
®
XP Service Pack 1 or earlier, continue with step 3.
2. Select NO, NOT THIS TIME.
3. Select the check box Install from a list or specific location (Advanced).
4. Click NEXT. The menu “Please choose your search and installation options” is displayed.
5. Select the check box Search for the best driver in these locations.
6. Select the check box Include this location in the search.
7. Type the path to the driver.
8. Click OK.
9. Click NEXT. In case the network adapter has not passed Windows Logo testing to verify its compatibility with Server 2003,
the window “Hardware Installation” is displayed.
10. To continue the installation, click Continue Anyway. In the window “Found New Hardware Wizard”, the menu “Completing
the Found New Hardware Wizard” is displayed.
11. Click FINISH to complete the installation.
Windows
®
XP and Server 2003 (32-bit)

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter Specifications

General

Brand	D-Link
Model	DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter
Category	Network Card
Language	English