D-Link DGE-560T User Manual 36
The SNMP Agent will launch automatically after it has been installed and the system has rebooted. Automatic launch of the SNMP Agent
for Windows start up can be enabled or disabled as desired.
When the SNMP Agent is active, a MIB browser can be used for device management. These MIB files are located in the D-Link PC Agent
folder. The three MIB files are included with the SNMP Agent are named:
• dlk_pc.mib
• RFC1213-MIB(DLK).mib
• Transmission.mib
A dialog box appears asking to select the default adapter card used with the PC Agent program. The DGE-560SX adapter will be selected
automatically if it is the only adapter used for the system. If multiple adapters are present, select the DGE-560SX from the drop down list
and click OK. The D-Link Ethernet Adapter Agent menu appears with the Configuration tab displayed.
Note: The drop-down menu in the Configuration tab lists any installed adapters capable of using the SNMP Agent.
Using the SNMP Agent
To Next Page
Loading...
Need help?
General
