D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual

D-Link DGE-560T User Manual 42
Standards:
• IEEE 802.3 10Base-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet standard
• IEEE 802.3ab/802.3z 1000BASE-T Gigabit Ethernet standard
• IEEE 802.3ad Link Aggregation Control Protocol standard
• IEEE 802.3x Flow-Control and Auto-Negotiation standard
• IEEE 802.1p Quality of Service standard
• IEEE 802.1q/802.3ac VLAN/VLAN Tagging standard
• PCI Express 1.0a specification
Network Media:
• Ethernet: UTP CAT3, 4, 5 EIA/TIA-568 100-ohm
• Fast Ethernet: UTP CAT5, EIA/TIA-568 100-ohm
• Gigabit Ethernet: UTP CAT5, EIA/TIA-568 100-ohm
Protocol:
• CSMA/CD
Host Interface:
• PCI Express x1 Serial Link
Diagnostic LEDs:
• Activity/Link
• Speed (Yellow: 1000Mbps; Green: 100Mbps; Off: 10Mbps)
Network Data Transfer Rate:
• Ethernet: 10Mbps (Half-duplex)
• Ethernet: 20 Mbps (Full-duplex)
• Fast Ethernet: 100Mbps (Half-duplex)
• Fast Ethernet: 200Mbps (Full-duplex)
• Gigabit Ethernet: 2000Mbps (Full-duplex)
Temperature:
• Operating: 0~50°C (32~122°F)
• Storage: -20~70°C (-4~158°F)
Humidity:
• Operating: 30%~80% non-condensing
• Storage: 10%~95% non-condensing
Driver Support:
• Windows Vista
™
x86
• Windows Vista
™
x64
• Microsoft Windows
®
XP
• Microsoft Windows
®
Server 2003
• Microsoft Windows
®
2000
• Linux kernel 2.4.13 and higher stable version
Emission:
• FCC Class B
• CE mark Class B
• VCCI-B
Visit http://support.dlink.com for newest releases of drivers.
Technical Specifications

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter Specifications

General

Brand	D-Link
Model	DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter
Category	Network Card
Language	English