D-Link DGE-560T User Manual 10
To install the driver, proceed as follows:
1. After you have installed the network adapter in your computer, boot Windows Vista. The Window “Found New Hardware” is
displayed. On the screen the menu “Locate and install driver software (recommended)”, “Ask me again later”, and “Don’t
show this message again for this device” three options are displayed.
2. Select Ask me again later.
3. Click on Start > Control Panel > System and Maintenance > Device Manager. The Window “Windows needs your
permission to continue” is displayed. To continue the installation, Click Continue anyway.
4. Expand Other devices plus (+) sign.
5. Click on Ethernet Controller and right-click mouse button to then choose Properties.
6. Click Driver in the tab menu.
7. Click Update Driver… The window “How do you want to search for driver software” is displayed. On the screen the menu
“Search automatically for updated driver software” and “Browse my computer for driver software” two options are displayed.
For locating drivers, click Browse my computer for driver software.
8. The window “Browse for driver software on your computer” is displayed. Browse the path to the driver and click Next.
9. The window “Windows has successfully updated your driver software” is displayed.
10. Click Close to complete the installation.
Windows
®
Vista
™
(32/64-bit)
To Next Page
Loading...
Need help?
General
