EasyManuals Logo

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background image
D-Link DGE-560T User Manual 12
Prepare the installation package
1. Login as “root”.
2. Unpack the installation package with one of the following commands:
tar xfvj install-???.tar.bz2
or
bunzip2 -c install-???.tar.bz2 | tar xfv -
The installation script can now be started.
Install the driver
To start the installation script, proceed as follows:
1. Execute the following command to start the script:
cd DriverInstall
./install.sh
2. Select the option INSTALLATION MODE.
The driver is now compiled and loaded. This process can take a few minutes. For more information on the Installation Mode or any
information on the Patch Generation Mode, refer to the corresponding readme file or to the kernel documentation (which usually can
be found in the directory /usr/src/linux/ Documentation/ on your system).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter and is the answer not in the manual?

D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter Specifications

General IconGeneral
BrandD-Link
ModelDGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter
CategoryNetwork Card
LanguageEnglish

Related product manuals