- 30 -
New password (4 characters or numbers at most): ****
Re-type new password: ****
show
Displays the current configuration. For first-time login, the current configuration is the
factory default settings. Refer to section titled “Factory Default Setting” for detail.
Example:
IP address of local port: [192.168.0.1]
SubNetmask of local port: [255.255.255.0]
Distribute IP addresses to local computers: [Yes]
Continuous IP address pool starts at: [192.168.0.2]
Number of IP address in pool: [32]
Obtain global port configuration from ISP: [Yes].. already claimed
4
IP address of global port: [203.66.99.1]
SubNetmask of global port: [255.255.255.0]
Device name: [Untitled]
Gateway: [203.66.99.254]
Primary DNS server: [205.178.225.1]
Secondary DNS server: [205.178.244.207]
set
The current settings appear by sequence. Press enter to accept the default or current value in
the bracket. Enter the appropriate value in the brackets to change it and then press Enter.
Press <Esc> at any time to abort this command.
Example:
command>set
Press <ENTER> if you agree with the default value,
4
Compared with Configuration claiming, meaning the configuration is still under
claiming, namely the global port configuration is invalid, Configuration claimed means
this device has obtained the global port configuration from the ISP. While in Configuration
claiming, the local computer is not able to access the Internet.
To Next Page
Loading...
Need help?
General
