D-Link DIR-655 User Manual

69D-Link DIR-655 User Manual
Section 3 - Conguration
Wi-Fi Protected Setup (WPS)
Enable the Wi-Fi Protected Setup feature.
Note: If this option is unchecked, the WPS button on the side of the router will
be disabled.
Disabling the wireless security settings prevents the settings from being
changed by the Wi-Fi Protected Setup feature of the router. Devices can still
be added to the network using Wi-Fi Protected Setup, however, the settings
of the network will not change once this option is checked.
A PIN is a unique number that can be used to add the router to an existing
network or to create a new network. The default PIN may be printed on the
bottom of the router. For extra security, a new PIN can be generated. You can
restore the default PIN at any time. Only the Administrator (“admin” account)
can change or reset the PIN.
Shows the current PIN.
Create a random number that is a valid PIN. This becomes the router’s PIN.
You can then copy this PIN to the user interface of the registrar.
This wizard helps you add wireless devices to the wireless network.
Restore the default PIN of the router.
Enable:
Disable WPS-PIN
Method:
PIN Settings:
Current PIN:
Generate New PIN:
Reset PIN to
Default:
Wi-Fi Protected Setup (WPS) System is a simplied method for securing your wireless network during initial setup as well as the “Add New Device”
processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufactures. The process is just as easy as pressing a button
for the Push-Button Method, or correctly entering the 8-digit code for the Pin Code Method. The time reduction in setup and ease of use are quite
benecial, while the highest wireless security setting of WPA2 is automatically used.

D-Link DIR-655 Specifications

Device Interface

number of gigabit lan ports	4
number of gigabit wan ports	1
usb port	1

Standards

ieee 802.11n	draft 2.0
ieee 802.11g	yes
ieee 802.3	yes
ieee 802.3u	yes

Weight and Dimensions

item dimensions (width x depth x height)	4.6” x 7.6” x 1.2”
packaging dimensions (width x depth x height)	8.1” x 10.9” x 2.6”
item weight	0.7 lbs
packaging weight	2.0 lbs