DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Super Mesh
On the Wi-Fi / Super Mesh page, you can enable the Super Mesh function. This function is
designed to quickly connect multiple devices into one transport network for providing high-quality
Wi-Fi coverage in living units of complicated planning or for creating a large temporary Wi-Fi
network for an outdoor event.
A mesh network consists of a main device (the Master role) and subordinate devices (the Slave
role). Devices connect to each other via wireless or wired connection. Settings are transmitted from
the main device to a subordinate one at the final step of configuring the Super Mesh function while
the devices are connected via an Ethernet cable (you don't need to manually specify all the
parameters on subordinate devices).
Figure 140. A mesh network structure.
If the device is in the router mode (the Router value is displayed in the Device mode line on the
Summary page), you can configure it as a main device (the Master role). If the device is in the
access point mode (the Access point value is displayed in the Device mode line on the
Summary page), you can configure it as a subordinate device (the Slave role).
!
The Super Mesh function cannot operate in both bands simultaneously. Select one of the
bands ( 2.4GHz or 5GHz ) for all devices of the configured network.
Page 179 of 303
To Next Page
Loading...
Need help?
General
Weight and Dimensions
