DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
Using WAN Port as LAN Port
To configure the WAN port of the router to be used as a LAN port, follow the next steps:
1. On the Connections Setup / WAN page, remove the WAN connection assigned to the
network interface of the VLAN which includes the WAN port (see the WAN section, page
84).
2. Go to the Advanced / VLAN page and remove the VLAN (see the VLAN section, page
209).
3. On the Advanced / WAN assignment page, deselect the WAN port and click the
APPLY button.
If you don't want to use the WAN port as a LAN port any longer, follow the next steps:
1. On the Advanced / WAN assignment page, select the WAN port and click the APPLY
button.
2. Go to the Advanced / VLAN page and create a VLAN which will include the WAN port
(see the VLAN section, page 209).
!
To create a network interface to which a WAN connection can be assigned upon adding the
VLAN, the Create interface switch should be moved to the right.
3. Go to the Connections Setup / WAN page and create a WAN connection which will be
assigned to the network interface of the VLAN (see the WAN section, page 84).
Page 213 of 303
To Next Page
Loading...
Need help?
General
Weight and Dimensions
