D-Link DWR-710 User Manual

30D-Link DWR-710 User Manual
Section 4 - Security
Congure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening the D-Link HSPA+ application or a web-
browser and entering the IP address of the router (192.168.0.1). Then click on Wireless Settings
on the left side.
2. Next to Security Mode, select WEP.
3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all
your wireless devices. You may enter up to 4 dierent keys.
4. Click Save Settings to save your settings. If you are conguring the router with a wireless
adapter, you will lose connectivity until you enable WEP on your adapter and enter the same
WEP key as you did on the router.

D-Link DWR-710 Specifications

General

Brand	D-Link
Model	DWR-710
Category	Network Router
Language	English