D-Link DWR-710 User Manual

52D-Link DWR-710 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows
®
7 - Click on Start > Control Panel > Network and Sharing Center
Windows
®
Vista
™
- Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections
Windows
®
XP - Click on Start > Control Panel > Network Connections
Windows
®
2000 - From the desktop, right-click My Network Places > Properties
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network
or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a
number between 2 and 99. Make sure that the number you choose is not in use on the network. Set
Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not
needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.

D-Link DWR-710 Specifications

General

Brand	D-Link
Model	DWR-710
Category	Network Router
Language	English