D-Link DWR-710 User Manual

32D-Link DWR-710 User Manual
Section 4 - Security
Congure WPA-PSK/WPA2-PSK
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening opening the D-Link HSPA+
application or a web-browser browser and entering the IP address of the router
(192.168.0.1). Then click on Wireless Settings on the left side.
2. Next to Security Mode, select WPA-PSK or WPA2-PSK.
3. Next to Pre-Shared Key, enter a key (passphrase). The key is an alpha-numeric
password between 8 and 63 characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key exactly the same on all other
wireless clients.
4. Click Save Settings to save your settings. If you are conguring the router with a
wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK)
on your adapter and enter the same passphrase as you did on the router.

D-Link DWR-710 Specifications

General

Brand	D-Link
Model	DWR-710
Category	Network Router
Language	English